Checking your Purchase:
Twin

In your package you should find:

  • 6 Threaded leg Stems
  • 6 Base Plates
  • 24 Philips Head Screws

Tools for easy installation:

In order to successfully install your Universal Bedlegs. you will need only a power screwdriver.

step one

Determining the Boxspring Side Rail Measurements

It is now time to determine what the measurements of your boxspring rails actually are, and how to position your baseplates properly on them.

If side rails are less than 2 1/4′ wide, the Universal Bedleg System will not work properly, DO NOT INSTALL!

step two

Placement of Base Plate on Side Rail

(3 1/4)
Place first base plate 6″ from end of boxspring and flush to the outside edge of side rail.

Use A and C holes for screw placement

step two

Placement of Base Plate on Side Rail

(2 1/4)

Place first base plate 6″ from end of boxspring and flush to the outside edge of side rail.

NOTE: There will be a slight overhang to the inside edge of side rail.

Use A and B holes for screw placement.

step three

Place Base Plates on Twin Bed

Diagram represents proper base plate placement only. It does not represent a specific side rail size.

step four

Attaching Base Plates to Boxspring

Using a power screwdriver. mount the plate to the boxspring using supplied hardware.

  • USE ONLY 4 SCREWS PER PLATE!

step five

Attaching Leg Stems to Base Plates

Hand twist the threaded leg stem into the base plate

Twin Tools Step1 Step2 Step3 Step4 Step5
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping
      Apply Coupon